Figure 203 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Figure 204 Firmware Upload Error
24.10 Configuration Screen
See
Section 38.5 on page 500
Click MAINTENANCE, and then the Configuration tab. Information related to factory
defaults, backup configuration, and restoring configuration appears as shown next.
Chapter 24 Maintenance
for transferring configuration files using FTP/TFTP commands.
ZyWALL 5 User's Guide
383