Configuration Backup/Restore Screen - ZyXEL Communications LTE3301 Series User Manual

Figure 93 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 60 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Note: Do not turn off the LTE3301 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
LTE3301 again.
The LTE3301 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 94 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.

20.7 Configuration Backup/Restore Screen

Backup configuration allows you to back up (save) the LTE3301's current configuration to a file on
your computer. Once your LTE3301 is configured and functioning properly, it is highly recommended
that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your LTE3301.
Chapter 20 Maintenance
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
LTE3301 Series User's Guide
131