Powering On The System - Brocade Communications Systems ICX 6430 Installation Manual

5. Check the LEDs on the external power supply to ensure proper operation with the devices. On
FIGURE 51
1 EPS Input port on the ICX 6430
or ICX 6450 device
2 ICX 6430 and ICX 6450
devices
3 AC power supplies for ICX
6430 or ICX 6450 devices.
NOTE
For international use, you may need to change the AC line cord. You must use a line cord set that
has been approved for the receptacle type in your country.

Powering on the system

After you complete the physical installation, you can power on the system.
NOTE
The socket should be installed near the equipment and should be easily accessible.
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1002738-02
the ICX 6400-EPS1500, the LED indicators (EPS 1, EPS 2, and EPS 3) should light (green). If
the LEDs do not light, refer to
Connecting multiple devices to an external power supply
"Troubleshooting" on page 85.
4 AC power supply for ICX
6400-EPS1500
5 ICX 6400-EPS1500
6 Output port of the ICX
6400-EPS1500

Powering on the system

2
6 5
4
3
3
51