2.
Second device in stack
3.
Third device in stack
Powering on the system
After you complete the physical installation, you can power on the system.
NOTE
The power outlet should be installed near the equipment and should be easily accessible.
1.
Remove the power cord from the shipping container.
2.
Install the power cord clip.
3.
Attach the AC power cord to the AC connector on the rear panel.
4.
Insert the power cord plug into a 100V-240V outlet.
NOTE
To turn the system off, simply unplug the power cord or cords.
62
Brocade ICX 7250 Switch Hardware Installation Guide
Installation
53-1003898-02