Cable Specifications; Power Cords - Brocade Communications Systems ICX 6430 Installation Manual

7
Pinouts and signalling

Cable specifications

For information about supported transceivers and cable lengths and types, refer to the following
Brocade website at:
NOTE
Cable installation and network configuration affects overall transmission capability. For
network-specific recommendations, consult your local Brocade reseller or system engineer.

Power cords

NOTE
Brocade recommends that you use the power cord that is shipped with the device.
For the ICX 6430 and ICX 6450 devices to operate at 100V, the power cord should be C13 type
connector with 13A rating or better (NEMA-5-15 plug)
For the ICX 6430 and ICX 6450 devices to operate at 240V, the power cord should be C13 type
connector with 10A rating or better.
For the ICX 6400-EPS1500 to operate at 100V, the power cord should be C19 type connector with
20A rating or better (NEMA5-20P plug)
For the ICX 6400-EPS1500 to operate at 240V, the power cord should be C19 type connector with
13A or better.
All devices ship with United States compatible power cords unless otherwise specified at the time
of order. United Kingdom- and European-compatible power cords are also available.
84
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/Optics_
DS.pdf
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1002738-02