Mounting An External Power Supply In A Rack - Brocade Communications Systems ICX 6430 Installation Manual

Mounting an external power supply in a rack

DANGER
Make sure the rack or cabinet housing the device is adequately secured to prevent it from
becoming unstable or falling over.
Complete the following steps to install an external power supply in a rack.
1. Remove the rack mount kit from the shipping carton. The kit contains two L-shaped mounting
2. Using a Phillips screwdriver, attach the mounting brackets to the sides of the external power
FIGURE 45
3. Mount the external power supply in a rack using four rack-mounting screws, as illustrated in
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1002738-02
brackets, six sink-head mounting screws, four rack-mounting screws, and four cage nuts.
supply using six sink-head screws, as illustrated in
Attaching the mounting brackets for the ICX 6400-EPS1500
Figure 46.
Installing the device
Figure 45.
3
45