Brocade Communications Systems ICX 6430 Installation Manual page 20

1
Port, system, and power status LEDs
Table 3
conditions and status.
TABLE 3
LED
Ethernet
(1 - 24/48)
PoE/PoE+
(1~24/48)
SFP/SFP+
(X1 - X4) for ICX
6450 devices
SFP
(F1 - F4) for ICX
6430 devices
Out-of-band
management
port (2 LEDs)
Figure 17
FIGURE 17
1
Table 4
corresponding conditions and status.
8
lists the port status LEDs on the ICX 6450 and ICX 6430 devices and their corresponding
Port status LEDs
Condition
On/Flashing Green
Off
On/Green
Off
On/Flashing Green
On/Flashing Yellow
Off
On/ Flashing Green
Off
Off (both LEDs)
On/Flashing (left side)
On/Green (right side)
Right LED off, left LED
on or flashing
shows the location of the system status LEDs on the ICX 6430-48P device.
System status LEDs on 48-port model
Slot 3
System status LEDs
lists the system status LEDs on the ICX 6450 and ICX 6430 devices and their
Status
The port has established a valid link at 10, 100 or 1000 Mbps.
Flashing indicates the port is transmitting and receiving user
packets.
A link is not established with a remote port.
The port is providing PoE or PoE+ power to a connected device.
The port is not providing PoE or PoE+ power.
The SFP port is operating at 10 Gbps. Flashing indicates the port
is transmitting and receiving user packets at 10 Gbps.
The SFP port is operating at 1 Gbps. Flashing indicates the port is
transmitting and receiving user packets at 1 Gbps.
A link is not established with a remote port.
The SFP port is operating at 1 Gbps. Flashing indicates the port is
transmitting and receiving user packets at 1 Gbps.
A link is not established with a remote port.
Offline
Link-up. Flashing indicates the port is transmitting and receiving
user packets.
1 Gbps Link-up
10/100 Mbps Link-up. Flashing indicates the port is transmitting
and receiving user packets.
1
A/S
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1002738-02