Network And Management Interfaces; Console Management Interface - Brocade Communications Systems ICX 6430 Installation Manual

1

Network and management interfaces

Network and management interfaces
Each ICX 6430 and ICX 6450 includes the following management interfaces, and a system reset
button on the front panel of the device:
•
•
•
These RJ45 management ports are located together in the middle of the front panel on 24-port
models, and on the left side of the front panel on 48-port models. Refer to
FIGURE 13
1
2
FIGURE 14
1
2

Console management interface

The console management interface is an RJ45 serial port that allows you to configure and manage
the device using a third-party terminal emulation application from a directly connected PC.
4
Console management interface (RJ45 serial port)
Out-of-band management interface (RJ45 port)
Reset button
Management interfaces and slot locations on 24-port models
Console port
Slot 2 (SFP and SFP + uplink or stacking ports)
Management interfaces and slot locations on 48-port models
1 1 2 2
1 1 3 3
2 2 4 4
3 3
Console port
Slot 2 (SFP and SFP + uplink or stacking ports)
1 1 1
2 2 2
1 1 3 3
2 2
4 4
3 3 3
3
4
4 4
3
4
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Figure 13
4 4 4
Out-of-band management port
Slot 1 (10/100/1000 Mbps ports)
Out-of-band management port
Slot 1 (10/100/1000 Mbps ports
and Figure 14.
53-1002738-02