Brocade Communications Systems ICX 6430-C Hardware Installation Manual
Compact switch
Hide thumbs
Also See for ICX 6430-C:
- Installation instructions manual (64 pages) ,
- Software update (128 pages) ,
- Diagnostic manual (220 pages)
Related Manuals for Brocade Communications Systems ICX 6430-C
Summary of Contents for Brocade Communications Systems ICX 6430-C
- Page 1 HARDWARE INSTALLATION GUIDE Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02 Publication Date: 15 June 2017...
- Page 2 United States government. The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.
-
Page 3: Table Of Contents
System status LEDs............................................. 14 Network connection status LEDs......................................15 Power supplies................................................. 18 Power supply usage............................................. 18 ICX 6430-C Installation........................................19 Items included with an ICX 6430-C device....................................19 Summary of installation tasks..........................................19 Installation precautions............................................20 General precautions............................................20 Lifting precautions............................................20 Power precautions............................................20 Preparing the installation site..........................................21... - Page 4 VCCI statement................................................57 Cautions and Danger Notices......................................59 Cautions..................................................59 General cautions.............................................59 Electrical cautions............................................60 Danger Notices................................................ 61 General dangers............................................. 61 Electrical dangers............................................61 Dangers related to equipment weight....................................63 Laser dangers..............................................63 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 5: Preface
Identifies keywords and operands. Identifies the names of GUI elements. Identifies text to enter in the GUI. italic text Identifies emphasis. Identifies variables. Identifies document titles. Identifies CLI output. Courier font Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 6: Command Syntax Conventions
Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as well as your suggestions for improvement. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 7: Contacting Brocade Technical Support
Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise. For more information, contact Brocade or your OEM. • For questions regarding service levels and response times, contact your OEM/solution provider. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 8 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 9: About This Document
There are no enhancements in this edition. Supported Software For information about the features supported on a hardware platform, refer to the appropriate Features and Standards Support Matrix document. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 10 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 11: Product Overview
PC. Out-of-band management interface The out-of-band management interface is an RJ-45 port that allows you to configure and manage the device from the network. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 12: Reset Button
2 100 Mbps/1 GbE SFP uplink ports (Slot 3, ports F1-F2) Slot designations The following table lists the slot designations for an ICX 6430-C device. Refer to the “Network and management interfaces” section for the location of slots 1- 3 on the front panel of an ICX 6430-C device. -
Page 13: Port, System, And Power Status Leds
Additionally, an ICX 6430-C device contains two 1100 Mbps/1 GbE small form-factor pluggable (SFP) ports (ports F1 and F2). These ports reside on slot 3 of the switch and can be used as uplink ports. The SFP ports support 100 Mbps/1 GbE port speeds. -
Page 14: System Status Leds
FIGURE 3 System status LEDs on an ICX 6430-C12 device System status LEDs The following table lists the system status LEDs on an ICX 6430-C device and their corresponding conditions and status: Brocade ICX 6430-C Compact Switch Hardware Installation Guide... -
Page 15: Network Connection Status Leds
You can use the CLI. If you have configured an IP address on the device, you also can use the Web management Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 16 If you are not certain, remove the two cable connectors from the port connector and Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 17 Web management interface or Brocade Network Advisor. • If the other actions do not resolve the problem, try using a different Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 18: Power Supplies
If a problem persists after taking these actions, contact Brocade Technical Support. Power supplies An ICX 6430-C device has one standard power supply receptacle on the rear panel of the device for the AC power cord. FIGURE 4 ICX 6430-C AC power connection... -
Page 19: Icx 6430-C Installation
Where to find more information Ensure that the physical environment that will Preparing the installation site on page 21 host the device has the proper cabling, ventilation, and clearance. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 20: Installation Precautions
Compare this total with the rating limit for the circuit. The maximum ampere ratings are usually printed on the devices near the input power connectors. DANGER Disconnect the power cord from all power sources to completely remove power from the device. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 21: Preparing The Installation Site
• Temperature: Because the temperature within a rack assembly may be higher than the ambient room temperature, check that the rack-environment temperature is within the specified operating temperature range. (Refer to the “Brocade ICX 6430-C Compact Switch Technical Specifications” section.) -
Page 22: Installing The Device
Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and progressively place lighter devices above. Desktop installation Complete the following steps to install the ICX 6430-C device on a desktop or other flat surface. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 23: Rack Mount Installation
The devices use stationary mounting when mounted in a rack. The rack-mount kit is not included with the device and is available to order separately. DANGER Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 24 Using a Phillips screwdriver, attach the mounting brackets to the sides of the device using six sink-head screws. FIGURE 6 Attaching the mounting brackets for an ICX 6430-C device Remove the two-post rack kit from the shipping carton. The kit contains four rack-mounting screws and four cage nuts.
-
Page 25: Wall Mount Installation
Wall Mount Holes Location template • Tape To mount the device to a wall using the wall mount brackets, refer to the “Wall mount installation using wall mount brackets” task. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 26 Using the Wall Mount Holes Location template as a guide, drill two holes in the wall where you want to mount the device. Hammer the wall-mount anchors into the two holes. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 27 FIGURE 8 Preparing to wall mount the device Drilled holes in wall Wall-mount anchors Wall-mount screws 4.0-4.5 mm space between screw head and wall Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 28 FIGURE 9 Wall mounting the ICX 6430-C device - View of rear panel Brocade ICX 6430-C Compact Switch Hardware Installation Guide...
-
Page 29: Wall Mount Installation Using Wall Mount Brackets
When mounting the device on a wall, Brocade recommends that you mount the device with the port side down. To mount the ICX 6430-C device to a wall, use the rack-mount kit that can be ordered separately from the device (Brocade Part Number: ICX6400-RMK). - Page 30 Using a Phillips screwdriver, attach the wall-mount brackets to the sides of the device using four sink-head screws. FIGURE 11 Attaching the wall-mount brackets for an ICX 6430-C device Drill two holes on the wall where you want to mount the device.
-
Page 31: Mounting The Device With A Magnet
Installing the device Use the two wall-mount screws to fasten the device to the wall-mount anchors. FIGURE 12 Wall mounting the ICX 6430-C device Drilled holes Wall-mount screws Wall-mount anchors Mounting the device with a magnet CAUTION Ensure that adequate ventilation is provided for the system. A 3 cm clearance is recommended above the device and 8 cm clearance is recommended on each side. - Page 32 The magnet sheet can only be placed against the bottom panel of the device. Do not attempt to attach the magnet sheet to any other panels on the device. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 33 Installing the device FIGURE 13 Attaching the logo side of the magnet sheet to the bottom panel of the ICX 6430-C device NOTE Do not install the rubber feet or remove the rubber feet if they are already installed. Mounting the device on a metal surface or metal wall...
- Page 34 Place the magnet sheet (with the logo side now attached to the bottom panel of the device) against the metal surface or metal wall. FIGURE 14 Mounting an ICX 6430-C device to a metal surface using the magnet mount Brocade ICX 6430-C Compact Switch Hardware Installation Guide...
- Page 35 CAUTION Do not mount the ICX 6430-C device or the ICX 6450-C device directly underneath a desktop surface with the top panel facing downward. Only mount the ICX 6430-C device or the ICX 6450-C device underneath a desktop by attaching it to the metal side surface of the desk, with the front panel and ports facing downward.
- Page 36 Installing the device Complete the following steps to securely mount an ICX 6430-C device under a metal desktop: Ensure that the magnet sheet is attached to the bottom panel of the device. Refer to Attaching the magnet sheet to the device on page 32.
- Page 37 Place the bottom panel of the device with the magnet sheet attached under the metal desk, against the side of the device. Ensure that the front panel (port side) of the device is facing downward. FIGURE 16 Mounting an ICX 6430-C device underneath a metal desktop using the magnet mount Magnet...
-
Page 38: Powering On The System
Powering on the system FIGURE 17 The ICX 6430-C device securely mounted underneath a metal desk with the port side facing down Powering on the system After you complete the physical installation, you can power on the system. NOTE The socket should be installed near the equipment and should be easily accessible. - Page 39 Remove the power cord from the shipping container. Attach the AC power cord to the AC connector on the rear panel. Insert the power cord plug into a 100V-240V outlet. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 40 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 41: Configuring An Icx 6430-C Device
IP address. For example, enter "209.157.22.99/24" for an IP address that has a network mask with 24 significant ("mask") bits. By default, the CLI displays network masks in classical IP address format (for example, 255.255.255.0). You can change the display to the prefix format. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 42 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 43: Managing An Icx 6430-C Device
Sensor A Temperature Readings: Current temperature : 50.0 deg-C Warning level..: 76.0 deg-C Shutdown level..: 83.0 deg-C Boot Prom MAC : 748e.f8ea.0360 Management MAC: 748e.f8ea.0360 ===== Syntax: show chassis Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 44: Changing The Temperature Warning Level
!!! Temperature is over shutdown level, please shutdown your stack unit 1 to avoid hw damage!!! NOTE Brocade recommends that you shut down your stack unit to avoid any hardware damage. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 45: Brocade Icx 6430-C Compact Switch Technical Specifications
Brocade ICX 6430-C Compact Switch Technical Specifications This document highlights the features and specifications for the Brocade ICX 6430-C compact switch. System specifications System component Description Enclosure Compact, fanless, standalone chassis Power inlet Power supply Integrated AC power supply for system and PoE power... -
Page 46: Other
-40°C to 70°C (-40°F to 158°F) Relative humidity (non- 5% to 95% 0% to 95% condensing) Altitude (above sea level) 3000 m (10,000 feet) 4572 m (15,000 feet) Heat dissipation 62 BTU/hr Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 47: Power Supply Specifications (Per Psu)
Power consumption (maximum configuration) Maximum: Fully configure all ports with 100% traffic throughput and maximum Power over Ethernet (PoE) load. NOTE The Brocade ICX 6430-C compact switch does not support -48 VDC input power. Model name @100 VAC input @200 VAC input... -
Page 48: Memory Specifications
1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (EU REACH) • Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 – U.S. Conflict Minerals Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 49 30/2011/TT-BCT – Vietnam circular • SJ/T 11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in EIPs (China) • SJ/T 11364-2006 Marking for the Control of Pollution Caused by EIPs (China) Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 50 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 51: Troubleshooting
Verify that all system components have been properly installed. If one or more components appear to be malfunctioning (such as the power cord or network cabling), test them in an alternate environment where you are sure that all the other components are functioning properly. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 52: Virtual Cable Testing
Viewing the results of the cable analysis To display the results of the cable analysis, enter a command such as the one shown in the following examples at the Privileged EXEC level of the CLI. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 53 T568A pair and color assignment Pair A Pair 3 (green) Pair B Pair 2 (orange) Pair C Pair 1 (blue) Pair D Pair 4 (brown) The following figure illustrates the T568A pin/pair assignment. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
- Page 54 Shorted: A short is detected in the cable. • Open: An opening is detected in the cable. • ImpedMis: The impedance is mismatched. • Failed: The TDR test failed. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 55: Regulatory Statements
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, ICES-003 Class A. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 56: China Cc Statement
Europe and Australia (CISPR 22 Class A Warning) This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 57: Fcc Warning (Us Only)
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance might arise. When such trouble occurs, the user might be required to take corrective actions. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 58 Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 59: Cautions And Danger Notices
Si se realizan cambios o modificaciones en este dispositivo sin la autorización expresa de la parte responsable del cumplimiento de las normas, la licencia del usuario para operar este equipo puede quedar anulada. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... -
Page 60: Electrical Cautions
CAUTION Do not mount the ICX 6430-C device or the ICX 6450-C device directly underneath a desktop surface with the top panel facing downward. Only mount the ICX 6430-C device or the ICX 6450-C device underneath a desktop by attaching it to the metal side surface of the desk, with the front panel and ports facing downward. -
Page 61: Danger Notices
Los procedimientos de este manual deben llevarlos a cabo técnicos cualificados. Electrical dangers DANGER Before beginning the installation, see the precautions in “Power precautions.” GEFAHR Vor der Installation siehe Vorsichtsmaßnahmen unter “Power Precautions” (Vorsichtsmaßnahmen in Bezug auf elektrische Ablagen). Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02... - Page 62 Débarrassez-vous des piles usagées conformément aux instructions. PELIGRO Riesgo de explosión si se sustituye la batería por una de tipo incorrecto. Deshágase de las baterías usadas de acuerdo con las instrucciones. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...
-
Page 63: Dangers Related To Equipment Weight
Alle Glasfaser-Schnittstellen verwenden Laser der Klasse 1. DANGER Toutes les interfaces en fibres optiques utilisent des lasers de classe 1. PELIGRO Todas las interfaces de fibra óptica utilizan láser de clase 1. Brocade ICX 6430-C Compact Switch Hardware Installation Guide Part Number: 53-1003618-02...