Powering On The System - Brocade Communications Systems ICX 7250-24G Hardware Installation Manual

• For the first device in the stack, ports (1/2/1, 1/2/2) are being used as stacked ports.
• For the second device in the stack, ports (2/2/1, 2/2/2 and 2/2/3, 2/2/4) are being used as stacked
ports.
• There is a single physical connection between device 1 and device 2 in the stack, ports 1/2/1 and
2/2/1. This is a stacked-port configuration, odd-numbered port to odd-numbered port.
• There are two physical connections between device 2 and device 3 in the stack. Port 2/2/3 is
connected to port 3/2/7 (odd-numbered port to odd-numbered port) and port 2/2/4 is connected to
3/2/8 even-numbered port to even-numbered port. This is a stacked-trunk configuration.
FIGURE 17 Linear stacking topology
1. First device in stack
2. Second device in stack
3. Third device in stack
In ring stack topology, there is an extra connection between the logical first and last devices forming a
"ring" or "closed-loop." The closed-loop connection provides a redundant path for the stack link, so if
one link fails, stack communications can be maintained.
FIGURE 18 Ring stacking topology
1. First device in stack
2. Second device in stack
3. Third device in stack

Powering on the system

After you complete the physical installation, you can power on the system.
Brocade ICX 7250 Switch Hardware Installation Guide
53-1003622-02

Powering on the system

33