Power Supplies - Brocade Communications Systems ICX 6430 Installation Manual

1

Power supplies

FIGURE 19
NOTE
The location of the power status LED on the front panel of the ICX 6430-48 and ICX 6430-48P
devices is the same on the ICX 6430-24P device, ICX 6450-24 device, ICX 6450-24P device, and the
ICX 6450-48 device.
1
FIGURE 20
1
Table 5
corresponding conditions and status.
TABLE 5
LED
Internal power
status
Power supplies
ICX 6430 and ICX 6450 devices have one standard power supply receptacle on the rear panel of
the device for the AC power cord. The connector labeled "EPS" is for the optional external power
supply cord that can provide power to the device in the event the internal power supply fails
(Figure
10
Power status LED on the ICX 6430-48 and ICX 6430-48P models
1
Power status LEDs
Power status LED on the ICX 6450-48P model
1
Power status LEDs
describes the power status LED on the ICX 6450 and ICX 6430 devices and the
Power status LED
Condition
Off
Green (steady)
Yellow (steady)
21).
Status
No input power
Internal Power Supply Unit (PSU) is working normally
Internal PSU failed, power is provided by EPS.
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1002738-02