Right Handle Switches - HYOSUNG MS3 250 Owner's Manual

④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change direc-
tion.
◉ " � " Position : Flash the left turn sig-
◉ " � " Position : Flash the right turn sig-
CAUTION
Failure to use the turn signals, and
failure to turn off the turn signals can
be hazardous. Other drivers may mis-
judge your course and this may result
in an accident.
Always use the turn signals when you
intend to change lanes or make a
turn. Always be sure to turn the turn
signal switch to the "OFF" position
after completing the turn or lane
change.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
nal lamp.
nal lamp.

RIGHT HANDLE SWITCHES

�
① ①
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
WARNING
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
② ②
ENGINE STOP SWITCH
◉ " " Position : Using when dangerous
condition of falling down during
drive and others or engine stop
suddenly. The ignition circuit is
off. The engine cannot start or
run.
◉ " " Position : Using when need
operation of engine as drive and
others. The ignition circuit is on
and the engine can run.
26
�
�
�
�