HYOSUNG MS3 250 Owner's Manual page 36

WARNING
New and used oil can be hazardous.
Children and pets may be harmed by
swallowing new or used oil.
Continuous contact with used engine
oil has been found to cause skin can-
cer in laboratory animals. Brief con-
tact with used oil may irritate skin.
Keep new and used oil and used oil fil-
ters away from children and pets. To
minimize your exposure to used oil,
wear a long-sleeve shirt and moisture-
proof gloves (such as dishwashing
gloves) when changing oil. If oil con-
tacts your skin, wash thoroughly with
soap and water. Launder any clothing
or rags if wet with oil. Recycle or prop-
erly dispose of used oil and filters.
WARNING
● ● The engine oil temperature may be
high enough to burn you when the
drain plug is loosened. Wait until
the drain plug is cool enough to
touch with bare hands before drain-
ing oil.
● ● Do not touch the hot muffler, or the
hot muffler can burn you.
5. Reinstall the engine oil drain plug ②
securely, but do not overtighten them.
6. Loosen the engine oil filter ③
clockwise and remove it with a filter
wrench of proper size.
7. Wipe off the mounting surface on the
engine where the new engine oil filter will
be seated with a clean rag.
8. Smear a little engine oil around the rub-
ber gasket of the new engine oil filter.
When replacing the engine oil filter, it
is highly recommended that you use a
genuine HYOSUNG oil filter designed
for your motorcycle, as other filters
may have different design and thread
specifications which could cause
engine damage or oil leaks.
35
� �
CAUTION
counter-