HYOSUNG MS3 250 Owner's Manual page 62

Motorcycle
Hide thumbs Also See for MS3 250:
Table of Contents

Advertisement

◉ ◉ BRAKE FLUID
Be sure to check the brake fluid level in
the master cylinder. If the level was found to
be lower than the lower mark holding the
motorcycle upright, inspect the brake pad's
wear condition.
As the brake pads wear, the fluid level will
drop to compensate for the new position of
brake pads.
If the brake pad's wear condition is good,
replenish with the proper brake fluid that
meets Hyosung's requirements.
[Front Brake]
[Rear Brake]
WARNING
Brake fluid may be harmful if swal-
lowed or if it comes in contact with
skin or eyes. Contact your doctor
immediately if brake fluid is swal-
lowed and induce vomiting. If brake
fluid gets into the eyes or in contact
with the skin, flush thoroughly with
plenty of water.
These motorcycles uses glycol-based
brake fluid.
Do not use or mix different types of
brake fluid, otherwise serious damage
will result in the brake system.
Use DOT4 brake fluid for front and
rear.
Do not spill any brake fluid on painted
or plastic surfaces as it will damage
the surface severely.
Never use any brake fluid that has
been stored in a used or unsealed
container. Never reuse brake fluid left
over from the last servicing and
stored for long period as it absorbs
moisture from the air.
61
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms3 125

Table of Contents