HYOSUNG MS3 250 Owner's Manual page 4

IMPORTANT
BREAK-IN INFORMATION FOR
YOUR MOTORCYCLE
The first 1,600 km (1,000 miles) are the
most important in the life of your motorcycle.
Proper break-in operation during this time
will help ensure maximum life and perfor-
mance from your new motorcycle.
Hyosung parts are manufactured of high
quality materials, and manufactured parts
are finished to close tolerances. Proper
break-in operation allows the machined sur-
faces to polish each other and mate
smoothly.
Motorcycle reliability and performance
depend on special care and restraint exer-
cise during the break-in period. It is espe-
cially important that you avoid operating the
engine in a manner which could expose the
engine parts to excessive heat.
Please refer to the BREAK-IN section for
specific break-in recommendations.
WARNING / CAUTION / NOTE
Please read this manual and follow its
instructions carefully.
To emphasize special information the
words 『 WARNING 』 , 『 CAUTION 』and
『 NOTE 』 have special meanings.
Information following these signal words
should be carefully reviewed.
WARNING
The personal safety of the rider may
be involved. Disregarding this infor-
mation
could result in injury to the rider.
CAUTION
These instructions point out special
service procedures or precautions
that must be followed to avoid dam-
aging the machine.
N O T E
This provides special information to
make maintenance easier or impor-
tant instructions clearer.
3