HYOSUNG MS3 250 Owner's Manual page 23

⑤ ⑤
COOLANT TEMPERATURE METER
LCD(Liquid Crystal Display) type, it indi-
cates the coolant temperature.
The "H"(Hot) mark indicates the coolant
temperature is hot.
When the coolant temperature is higher
than 125℃, the coolant temperature meter
displays all 5 segments.
The only lowest segment flickers when
the coolant temperature is cool.
CAUTION
Running the engine with high engine
coolant temperature can cause seri-
ous engine damage.
If the engine coolant temperature
meter displays all 5 segments, stop
the engine to let it cool.
Do not run the engine until the only
lowest segment flickers.
's speedometer is
⑥ ⑥
ODOMETER / TRIP METER
The display in it has two functions,
odometer and trip meter.
The display changes odometer or trip
meter, as indicated before turning the igni-
tion switch off.
The odometer registers the total distance
that the motorcycle has been ridden.
The trip meter is resettable odometer.
To change the display, push the switch ⑨
for 0.6 ~ 1 seconds while the display indi-
cates the odometer or trip meter you want
to change.
Odometer
Trip meter
To reset the trip meter to zero, push the
switch ⑧
(in the trip meter mode) for 0.6 ~
1 seconds.
The odometer and trip meter changes a
kilometer mode or mile mode.
To change the mode, push the switch ⑧
22