HYOSUNG MS3 250 Owner's Manual page 77

HEAD LAMP
◉ ◉ ADJUSTMENT OF THE HEAD
LAMP BEAM
For a quick beam inspection, place the
motorcycle on level ground, ten meters
away from a vertical wall.
Switch on the low beam, sit astride the
motorcycle and make sure that the lamp
spot on the wall is just below the horizontal
line of the head lamp (about nine/tenths of
overall height).
10 m
Hi beam
Low beam
Turn the adjuster screws ① , ②
head lamp bulbs with a screwdriver to
adjust as follows : turn CLOCKWISE to
lower the beam.
Turn COUNTER-CLOCKWISE to raise
the beam.
76
�
�
of both