◉ ◉ HEAD LAMP
CAUTION
Never pull on the wiring to disconnect
head lamp coupler.
1. Disconnect the head lamp coupler.
2. Remove the dust cover ①
spring.
3. After removing the bulb at the socket,
replace the new bulb.
4. To install the head lamp, reverse the
above sequence.
CAUTION
The use of a lamp other than rules
may cause to occur the motorcycle
fire and to damage electric parts.
Surely use only the bulb of proper
capacity.
�
and socket
79
◉ ◉ BRAKE / TAIL LAMP
1. Lift the side cover. (Refer to page 70)
2. Turn the socket ①
wise and pull it out at the lamp housing.
3. Push in the bulb, turn it to the counter-
clockwise and pull it out.
4. To fit the replacement bulb, push it in
and turn it to the clockwise while push-
ing.
�
to the counter-clock-