HYOSUNG MS3 250 Owner's Manual page 43

" "(ON) position or fails to go out
after the engine start, contact an
authorized Hyoung dealer.
� � Squeeze the rear brake lever.
CAUTION
If the front or rear brake lever is not
squeezed, the starting motor will not
rotate.
� � Push the starter switch without turn-
ing the throttle grip after go off the
"FI" check lamp.
● ● Take off the starter switch right
after started.
● ● Do not engage the starting motor
for more than five seconds at a
time as it may overheat the wiring
harness and starting motor.
If the engine does not start after
several attempts, check the fuel
supply and igintion system.
(Refer for Page 80)
42
CAUTION