Right Handle Switch - HYOSUNG SF 50 B Manual

RIGHT HANDLE SWITCH

LIGHT SWITCH
Position : The head lamp, meter
lamp and tail lamp come on. If
not start engine, do not come on.
Position : The head lamp, meter
lamp and tail lamp go off.
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
WARNING
Apply the brake lightly and with great
care on slippery surfaces to avoid skid-
ding.
THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
WARNING
Avoid turning the throttle grip during
brakes.
STARTER SWITCH
Use this switch to operate the starting
motor.
With the ignition switch in the
position, push the starter switch to start the
engine.
N O T E
If the front or rear brake lever is not
squeezed, the starting motor will not
rotate.
20
(ON)