HYOSUNG MS3 250 Owner's Manual page 79

◉ ◉ REPLACEMENT OF THE LAMP
Requirement electric power of the lamp
shown in the following chart.
When replace the damaged lamp, always
use the equal capacity.
The use of a lamp other than rules may
cause to excessive at the electric system or
to damage the lamp.
NAMES
HI
Head
LO
lamp
Position
Brake / Tail lamp
Turn signal lamp
License plate lamp
※ LED (Light Emitting Diode)
CAUTION
The use of a lamp other than rules may
cause to occur the vehicle fire and to
damage electric parts.
Surely use only the lamp of proper
capacity.
CAPACITY
12V - 55W×1
12V - 55W×1
12V - 5W×2
12V - 21/5W×1
LED type
12V - 5W×1
◉ ◉ TURN SIGNAL LAMP
lamps are LED (Light Emitting Diode) type.
If any abnormal condition are found, replace
the turn signal lamp assembly.
78
's the turn signal