HYOSUNG MS3 250 Owner's Manual page 63

◉ ◉ BRAKE PADS
Inspect the front and rear brake pads by
nothing whether or not the friction pads are
worn down to the grooved limit line. If a pad
is worn to the grooved limit line it must be
replaced with a new one by your authorized
Hyosung dealer or qualified service
mechanic.
The rate at which brake pads will wear
depends on motorcycle usage, riding style
and road surface condition.
[Front Brake]
[Rear Brake]
Inspect every day in the following point at
the brake system.
①
Brake fluid leakage of the front and rear
brake system.
②
Leak or damage of the brake hose.
③
Operating of the brake lever.
④
Wear of the front and rear brake pads.
The front and rear brake system be
replaced the brake hose or the brake
fluid according to periodic inspection
chart by your authorized Hyosung
dealer for safety as in times of operat-
ing at high pressure.
WARNING
Riding with worn brake pads will
reduce braking performance and will
increase your chance of having acci-
dent. Inspect brake pad wear before
each use. Ask your Hyosung dealer or
qualified mechanic to replace brake
pads if any pad is worn to the limit.
62
Limit line
CAUTION