Engine Coolant - HYOSUNG MS3 250 Owner's Manual

ENGINE COOLANT

◉ ◉ COOLANT LEVEL
The coolant should be kept between the
"F" (FULL) and "L" (LOW) level lines in the
reservoir tank at all times. Inspect the level
every time before riding while the motorcy-
cle vertically through the front frame cover.
If the coolant is found lower than the "L"
level line, add properly mixed coolant in the
following way :
If the reservoir tank is emptied, pour the
engine coolant to the reservoir tank and
radiator.
WARNING
Wait for the engine to cool down
before checking or topping up
coolant level.
F
L
1. Stop the engine and wait until it has
cooled down.
N O T E
Position the motorcycle on firm and
flat ground.
2. Open the coolant reservoir tank filler cap
cover ①
by lightly pressing.
3. Remove the filler cap ② .
4. Add properly mixed coolant through the
filler hole until it reaches the "F" line.
Refer to the FUEL, OIL AND COOLANT
RECOMMENDATION section (13 page).
Never top up beyond the "F" line or
coolant will leak out when the engine
is running.
39
CAUTION
�
�