HYOSUNG MS3 250 Owner's Manual page 76

positive (+) battery wire.
Remove the battery.
5. Clean the terminal.
If there is white dust, clean it with warm
water.
6. Connect the battery wires and grease
the terminal lightly.
When reinstalling the battery, be sure to
connect the positive (+) battery wire first,
then connect the negative (-) battery
wire.
CAUTION
● ● Keep the battery away from fires.
● ● When disconnecting the battery
wire, be sure to remove the nega-
tive (-) battery wire first with the
ignition switch "
tion, then remove the positive (+)
battery wire.
When reinstalling the battery, be
sure to connect the positive (+)
battery wire first, then connect the
negative (-) battery wire.
● ● Fasten certainly the battery wires.
● ● Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical sys-
tem damage due to incorrect bat-
tery lead connection.
● ● Never charge a battery while still in
the machine as damage may result
to the battery or regulator / rectifier.
" (OFF) posi-
75
◉ ◉ FUSE
The fuse box is located inside the right
cover. If the engine suddenly stops running
or any electrical system fails to operate then
the fuse must be checked.
In case a fuse blows there is a 30A for
main and 15A for head lamp spare fuse.
● 30A main fuse protects all electrical cir-
cuits.
● 15A head lamp fuse protects the head
lamp and high beam indicator lamp.
CAUTION
Never use other than specified 30A or
15A fuse.
Installing a fuse of incorrect rating
may seriously damage the electrical
system.
You should consult your Hyosung
dealer or a qualified service mechanic
immediately.