◉ ◉ LICENSE PLATE LAMP
1. Lift the side cover. (Refer to page 70)
2. Pull out the socket ①
ing.
3. Pull out the bulb at the socket.
4. Replace the new bulb.
5. To install the license plate lamp, reverse
the above sequence.
�
at the lamp hous-
TROUBLESHOOTING
This troubleshooting guide is provided to
help you find the cause of some common
complaints.
Failure to troubleshoot a problem cor-
rectly can damage your motorcycle.
Improper repairs or adjustments may
damage the motorcycle instead of fix-
ing it. Such damage may not be cov-
ered under warranty.
If you are not sure about the proper
action, consult your Hyosung dealer
about the problem.
80
CAUTION