Storage Procedure - HYOSUNG MS3 250 Owner's Manual

Motorcycle
Hide thumbs Also See for MS3 250:
Table of Contents

Advertisement

CAUTION
Cleaning with any alkaline or strong
acid cleaner, gasoline, brake fluid, or
any other solvent will damage the
windshield.
Clean only with a soft cloth and warm
water with a mild detergent.
◉ ◉ WAXING THE MOTORCYCLE
After washing the motorcycle, waxing and
polishing are recommended to further pro-
tect and beautify the paint.
● Only use waxes and polishes of good
quality.
● When using waxes and polishes,
observe the precautions specified by the
manufacturers.
◉ ◉ INSPECTION AFTER CLEANING
Remove the rags or wrapping from the
exhaust pipe. For extended life of your
motorcycle, lubricate according to "LUBRI-
CATION POINTS" section.
WARNING
Operating motorcycle with wet brakes
can be hazardous.
Wet brakes may not provide as much
stopping power as dry brakes. This
could lead to an accident.
Test your brakes washing motorcycle,
riding at slow speed. If necessary,
apply brakes several times to let fric-
tion dry out the pads.
Follow the procedures in the "INSPEC-
TION BEFORE RIDING"section to check
your motorcycle for any problems that may
have arisen during your last ride.

STORAGE PROCEDURE

If you don't plan on using your motorcycle
for a long time, it will need special servicing
requiring appropriate materials, equipment
and skill. For this reason, Hyosung recom-
mends that you trust this maintenance work
to your dealer. If you wish to service the
machine for storage yourself, follow the
general guidelines below :
◉ ◉ MOTORCYCLE
Clean the entire motorcycle.
Place the motorcycle on the center stand
on a firm, flat surface where it will not fall
over.
Turn the handlebars all the way to the left
and lock the steering, and remove the igni-
tion key.
◉ ◉ FUEL
Fill the fuel tank to the top with fuel.
◉ ◉ BATTERY
1. Remove the battery from the motorcycle.
N O T E
Be sure to remove the negative termi-
nal first, then remove the positive ter-
minal.
2. Clean the outside of the battery with mild
detergent and remove any corrosion from
the terminals and wiring harness connec-
tions.
3. Store the battery in a room above freez-
ing.
◉ ◉ TIRES
Inflate the tires to the normal pressure.
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms3 125

Table of Contents