HYOSUNG MS3 250 Owner's Manual page 70

CHECKING THE STEERING
Occasionally check the steering slack.
Check as follows :
● Position the vehicle on the center stand.
N O T E
Provide a support of adequate height
and width to support the vehicle safely.
● Place the support under the vehicle and
a spongy cloth between them, so that the
front wheel can move freely and the vehi-
cle can not fall down.
CAUTION
Make sure that the vehicle is stable.
● Shake the fork in the riding direction.
Do not shake the fork excessively,
otherwise you may take in considera-
tion the movement of the stand, thus
observing an incorrect slack. Repeat
the previous operation more than
once.
● If you find that there is considerable
slack, contact your authorised Hyosung
dealer to restore the optimal steering
conditions.
CHECKING THE ENGINE PIVOT
Periodically check the slack existing
between the engine pivot bushings.
Check as follows :
● Position the vehicle on the center stand.
● Shake the wheel right and left with
respect to the riding direction.
● If any slack should be noticed, contact
your authorised Hyosung dealer, to
restore the optimal operating conditions.
69
CAUTION