Stand; How To Use; How To Open The Seat - HYOSUNG MS3 250 Owner's Manual

Motorcycle
Hide thumbs Also See for MS3 250:
Table of Contents

Advertisement

STAND

These motorcycles is equipped with a
center stand and side stand.
① ①
CENTER STAND
To place the motorcycle on the center
stand, place your foot on the stand exten-
sion and then rock the motorcycle to the
rear and upward with the rear carrier with
your right hand, while steadying the handle-
bars with your left hand.
② ②
SIDE STAND
WARNING
Riding with the side stand incomplete-
ly retracted can result in an accident
when you turn left.
Always retract the side stand com-
pletely before starting off.
CAUTION
Park the motorcycle on firm, level
ground to help prevent it from falling
over.
For better security, place the motorcy-
cle on the center stand.
28

HOW TO USE

HOW TO OPEN THE SEAT

You can use the PERSONAL TRUNK
after opening the seat.
1) To unlock the seat, insert the ignition key
into the seat lock and turn it clockwise.
2) To lock the seat, push down firmly until
the seat latch snaps into the locked posi-
tion.
WARNING
Before leaving, make sure that the
seat is properly locked.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms3 125

Table of Contents