HYOSUNG MS3 250 Owner's Manual page 65

Motorcycle
Hide thumbs Also See for MS3 250:
Table of Contents

Advertisement

◉ ◉ FRONT & REAR BRAKE LAMP
SWITCH
The front & rear brake lamp switch is
located beneath the front & rear brake lever.
Loosen the switch fitting screws and adjust
the timing by moving the switch body for-
ward or backward.
Inspect the tire pressure and the tire
thread depth periodically.
Inspect frequently the tire pressure for the
safety and the tire life.
WARNING
Failure to follow these warnings may
result in an accident due to tire failure.
The tires on your motorcycle form the
crucial link between your motorcycle
and the road.
Follow these instructions ;
● ● Check tire condition and pressure,
and adjust pressure before each
ride.
● ● Avoid overloading your motorcycle.
● ● Replace a tire when worn to the
specified limit, or if you find dam-
age such as cuts or cracks.
● ● Always use the size and type of tires
specified in this owner's manual.
◉ ◉ TIRE PRESSURE
Insufficient air pressure in the tires not
only hasten tire wear but also seriously
affects the stability of the motorcycle.
Under-inflated tires make smooth corner-
ing difficult and over-inflated tires decrease
the amount of tire in contact with the ground
which can lead to skids and loss of control.
Be sure that the tire pressure is within the
specified limits at all times.
Tire pressure should only be adjusted
when the tire is cold.
If you see the problem with the tire, adjust
the pressure with the pressure gauge.
64
TIRES

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms3 125

Table of Contents