Chest Workout; Back - Body Solid G9S Assembly Instructions Manual

Hide thumbs Also See for G9S:
Table of Contents

Advertisement

EXM3700GLPS WORKOUT
Horizontal Grip Chest Press
(Pectorals)
Cable Crossover
(Pectorals)
Lat Pulldown
(Latissimus Dorsi)
Chest Supported Mid Row
(Latissimus Dorsi)
1. Insert pin into weight stack at desired resistance level.
2. Adjust seat pad, back pad and press arm pivot point
so that when seated the horizontal press handles
bisect the Chest (pectoral) muscles.
3. Sit comfortably on the seat pad with your back flat
against the back pad.
4. Grasp horizontal press handles with your arms bent
and palms facing down.
5. Keeping your elbows out and below your shoulders,
extend your arms forward at a smooth, moderate
pace throughout the exercise movement.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.
1. Insert pin into weight stack at desired resistance level.
2. Attach utility strap to low pulley cable.
3. Stand with your right side facing the low pulley and
your feet set shoulder width apart. Grasp the handle
with your right hand. Bend slightly at the waist and
maintain this torso angle throughout the exercise
movement.
4. Keeping your palm facing toward your body and arm
slightly bent, pull strap upward and across your body
in a semicircular arc until it is approximately level with
your shoulder.
5. Pause for a moment, then slowly return the strap,
back along the same arc, to the starting position.
Repeat movement.
6. Exhale on exertion, inhale on return motion.
7. Turn around and repeat with opposite arm.
1. Insert pin into weight stack at desired resistance level.
2. Attach Lat Bar to high pulley cable and adjust press
arms out of the way.
3. Adjust seat pad so your knees fit comfortably under
leg hold-down rollers. Sit on seat pad facing into
machine.
4. Grasp Lat Bar 3 to 6 inches wider than your
shoulders, on each side.
5. Keeping your elbows back during movement, slowly
pull the Bar down toward your chest until it lightly
touches the upper part of your chest.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.
1. Insert pin into weight stack at desired resistance level.
2. Adjust seat height so that when seated the Press
Arm handles pivot to slightly below your chest area.
Adjust chest pad and Press Arm handles to match
arm length for full stretch.
3. Sit facing machine. Lock your legs under rollers.
Keep chest flat against pad throughout movement.
4. Grasp the handles with both hands allowing the
weight to gently stretch your Lats.
5. Using back strength pull the handles toward you
being sure to keep your elbows close to your sides.
Continue to pull the Bar until it is even with your
midsection.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.
C H E S T
Incline Press
(Upper Pectorals)
Pectoral Fly
(Pectorals)
B A C K
Shrugs
(Trapezius)
Seated Row
( Latissimus Dorsi)
88
1. Insert pin into weight stack at desired resistance level.
2. Set Press Arms to the Incline Press position and set
back pad to the Incline Press position.
3. Adjust seat pad height so that when seated the
horizontal press handles bisect the upper chest
(pectoral) muscles.
4. Sit comfortably on the seat pad with your back flat
against the back pad.
5. Grasp horizontal bench handles with your arms bent
and palms facing downward.
6. Keeping your elbows out and below your shoulders,
extend your arms forward at a smooth, moderate
pace throughout the exercise movement.
7. Pause for a moment, then slowly return to the starting
position. Repeat movement.
8. Exhale on exertion, inhale on return motion.
1. Insert pin into weight stack at desired resistance level.
2. Adjust seat pad height so that when seated and
grasping handles your upper arms are parallel with
the floor.
3. Sit comfortably on the seat pad facing away from
the machine and your back flat against the back pad.
4. Grasp handles with arms slightly bent and upper
arms parallel with the floor.
5. Use Chest (pectoral) muscles to bring your arms
forward and inward until the pec arms touch.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.
1. Insert pin into weight stack at desired resistance level.
2. Attach Straight Bar to low pulley cable.
3. Stand facing the low pulley with your feet set
shoulder width apart.
4. Grasp the Straight Bar and stand erect with your
arms extended straight down and the Bar resting
across your thighs. Allow the weight to pull your
shoulders forward and downward.
5. Use Trapezius strength to "shrug" your shoulders
upward and backward as far as possible.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.
1. Insert pin into weight stack at desired resistance level.
2. Attach Straight Bar to low pulley cable.
3. Sit on the floor with your knees slightly bent and your
feet placed firmly against the foot brace.
4. Grasp the Bar in both hands. Straighten your arms
and lean towards the pulley to gently stretch your
Lats.
5. Simultaneously pull the Bar toward you and sit erect,
being sure to keep your elbows close to your sides.
Continue to pull the Bar until it touches your
midsection.
6. Pause for a moment, then slowly return to the
starting position. Repeat movement.
7. Exhale on exertion, inhale on return motion.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents