Page 4
I m p o r t a n t S a f e t y I n s t r u c t i o n s When using exercise equipment, you should always take basic precautions, including the following: Obtaining Service Personal Safety During Assembly Retain this Owner’s Manual for future...
Page 5
G F I D - 3 1 P r e p a r a t i o n Required Tools Assembly Tips Installation Requirements...
Page 6
H a r d w a r e L i s t Part# Size Description Quantity...
Page 7
H a r d w a r e ( T o S c a l e ) KEY # 8X65 Hex Head Bolt...
Page 12
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the last step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 14
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the last step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 16
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the last step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 18
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Wrench tighten all hardware at the end of this step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 22
® GFID-31 www.bodysolid.com Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and specifi cations when we feel it will improve the product. Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
Need help?
Do you have a question about the GFID-31 and is the answer not in the manual?
Questions and answers