Upholstery; Nuts/Bolts/Fasteners; Guide Rods; Adjustments/Locking Pins/Tightening Knobs - Body Solid G9S Assembly Instructions Manual

W a r n i n g ,
Precision craftsmanship assures Body-Solid's ability to
consistently deliver products of the highest standards. Our
products have been carefully designed to ensure safe, efficient
long term operation.
However, it must be realized that safe use of this equipment
requires that owners carefully read and follow the Body-Solid
use recommendations, warnings, and maintenance guidelines
in this Owners Manual.
Routine inspection and maintenance is of critical importance to
ensure the maximum safety and performance of the
EXM3700GLPS. Body-Solid uses the highest quality materials
available, but wear is inevitable. Therefore, you must carefully
inspect your equipment as outlined in the Maintenance
Schedule on the next page.
Be advised that dangerous conditions can arise even during a
warranty period. A warranty does not negate the owner's
responsibility to thoroughly, carefully and daily inspect the
machine.
Including maintaning the equipment the owner's responsibility is
also to:
Be sure to always provide adequate
supervision to all end-users.
Be sure to instruct all end-users of proper
usage.
Be sure all supervisors and personal trainers
who instruct end-users on equipment use are
properly trained and know the function and
importance of every adjustment and setting.
Also, be sure these trainers provide proper
instruction to end-users on the fundamentals
of strength training.
S a f e t y &
CABLES:

UPHOLSTERY:

NUTS/BOLTS/FASTENERS:

GUIDE RODS:

ADJUSTMENTS / LOCKING PINS / TIGHTENING
KNOBS:
ANTI-SKID SURFACES:
WARNING INSTRUCTION LABELS:
60
M a i n t e n a n c e
While the machine is not in use. Carefully run your
fingers along the cable to feel for thinning or
bulging areas. Replace cables immediately at the
first sign of damage or wear. Do not use
equipment until damaged cable has been
replaced.
Visually inspect the cables for fraying, cracking,
peeling or discoloration.
Check slack in cables and re-adjust cable tension
if needed. See pages 50-51.
Check that locking nut at Weight Stacks are tight.
Wipe down after every workout.
Periodically take the time to use a mild soap or a
mild vinyl upholstery cleaner. Avoid using any
abrasive cleaner not intended for use on vinyl.
Keep sharp or pointed objects out of your
pockets and clear of all upholstery.
Periodically inspect all nuts and bolts. Tighten if
needed. If bolts seem to loosen periodically, use
Loctite 242 for a long-term cure.
Go through a re-tightening sequence periodically
to ensure that all hardware is properly tensioned.
Wipe clean with a dust free rag. Lubricate with a
Silicon or Teflon based lubricant.
Check all pieces for signs of visible wear or
damage.
Check springs in Snap Links and Pop Pins for
proper tension and alignment.
If the spring sticks or has lost its rigidity, replace
it immediatly.
Replace if they appear worn or become slippery.
Inspect and familiarize yourself with all safety
warnings and other user information on decals.