Body Solid G9S Assembly Instructions Manual page 57

1.
(Reverse view drawing)
2.
Adjust
Upper Back
Pad (ZA)
side Ball Head
Pop Pin (56)
Pull Ball Head
Pop Pin (57)
Adjust
Seated Press
Arm (AC)
top Ball Head
Pop Pin (56)
! WA R N I N G
Pay special attention to the plunger on this Pop Pin (48).
Always be sure that the plunger is fully engaged into the hole
you select. Also, be sure that the spring in the Pop Pin (48)
operates freely. Failure to do so may result in serious injury.
Leg Extension
Seat Pad (V)
!
55
3.
Pull T-Shaped
Pop Pin (48)
Make sure Pop Pin (48) is fully
engaged into selector hole, and then
turn clockwise to lock it in place.