Ipv6 Mld Snooping Listener-Message-Suppression - Cisco Catalyst Blade Switch 3130 Reference Manual

ipv6 mld snooping listener-message-suppression

ipv6 mld snooping listener-message-suppression
Use the ipv6 mld snooping listener-message-suppression global configuration command on the switch
stack or on a standalone switch to enable IP version 6 (IPv6) Multicast Listener Discovery (MLD)
snooping listener message suppression. Use the no form of this command to disable MLD snooping
listener message suppression.
Note This command is available only if you have configured a dual IPv4 and IPv6 Switch Database
Management (SDM) template on the switch.
Command Default
The default is for MLD snooping listener message suppression to be disabled.
Command Modes
Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)
global configuration command and reload the switch.
MLD snooping listener message suppression is equivalent to IGMP snooping report suppression. When
enabled, received MLDv1 reports to a group are forwarded to IPv6 multicast routers only once in every
report-forward time. This prevents the forwarding of duplicate reports.
Examples
This example shows how to enable MLD snooping listener-message-suppression:
Switch(config)# ipv6 mld snooping listener-message-suppression
This example shows how to disable MLD snooping listener-message-suppression:
Switch(config)# no ipv6 mld snooping listener-message-suppression
You can verify your settings by entering the show ipv6 mld snooping [vlan vlan-id] user EXEC
command.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-214
ipv6 mld snooping listener-message-suppression
no ipv6 mld snooping listener-message-suppression
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
OL-13271-01