Cisco Catalyst Blade Switch 3130 Reference Manual page 382

For dell command reference
Hide thumbs Also See for Catalyst Blade Switch 3130:
Table of Contents

Advertisement

radius-server dead-criteria
Related Commands
Command
dot1x critical (global configuration)
dot1x critical (interface
configuration)
radius-server retransmit retries
radius-server timeout seconds
show running-config
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-354
Chapter 2
Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Description
Configures the parameters for the inaccessible authentication
bypass feature.
Enables the inaccessible authentication bypass feature on an
interface and configures the access VLAN to which the switch
assigns the critical port when the port is in the
critical-authentication state.
Specifies the number of times that the switch tries to reach the
RADIUS servers before considering the servers to be
unavailable. For syntax information, select Cisco IOS Security
Command Reference, Release 12.2 > Server Security
Protocols > RADIUS Commands.
Specifies the time in seconds during which the switch waits for
a RADIUS server to respond before the IEEE 802.1x
authentication times out. For syntax information, select Cisco
IOS Security Command Reference, Release 12.2 > Server
Security Protocols > RADIUS Commands.
Displays the operating configuration. For syntax information,
use this link to the Cisco IOS Release 12.2 Command
Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/pr
od_command_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2
to navigate to the command.
OL-13271-01

Advertisement

Table of Contents
loading

Table of Contents