Ip Dhcp Snooping Verify - Cisco Catalyst Blade Switch 3130 Reference Manual

ip dhcp snooping verify

ip dhcp snooping verify
Use the ip dhcp snooping verify global configuration command on the switch stack or on a standalone
switch to configure the switch to verify on an untrusted port that the source MAC address in a DHCP
packet matches the client hardware address. Use the no form of this command to configure the switch
to not verify the MAC addresses.
Syntax Description
This command has no arguments or keywords.
Defaults
The switch verifies the source MAC address in a DHCP packet that is received on untrusted ports
matches the client hardware address in the packet.
Command Modes Global configuration
Command History Release
12.2(40)EX1
Usage Guidelines In a service-provider network, when a switch receives a packet from a DHCP client on an untrusted port,
it automatically verifies that the source MAC address and the DHCP client hardware address match. If
the addresses match, the switch forwards the packet. If the addresses do not match, the switch drops the
packet.
Examples This example shows how to disable the MAC address verification:
Switch(config)# no ip dhcp snooping verify mac-address
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands Command
show ip dhcp snooping
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-174
ip dhcp snooping verify mac-address
no ip dhcp snooping verify mac-address
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Description
Displays the DHCP snooping configuration.
OL-13271-01