Debug Platform Cpu-Queues - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Appendix B
Cisco Catalyst Blade Switch 3130 for Dell Debug Commands
debug platform cpu-queues
Use the debug platform cpu-queues privileged EXEC command to enable debugging of platform
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
Syntax Description
broadcast-q
cbt-to-spt-q
cpuhub-q
host-q
icmp-q
igmp-snooping-q
layer2-protocol-q
logging-q
remote-console-q
routing-protocol-q Display debug messages about packets received by the routing protocol queue.
rpffail-q
software-fwd-q
stp-q
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
OL-13271-01
debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
no debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
Display debug messages about packets received by the broadcast queue.
Display debug messages about packets received by the core-based tree to
shortest-path tree (cbt-to-spt) queue.
Display debug messages about packets received by the CPU heartbeat queue.
Display debug messages about packets received by the host queue.
Display debug messages about packets received by the Internet Control Message
Protocol (ICMP) queue.
Display debug messages about packets received by the Internet Group
Management Protocol (IGMP)-snooping queue.
Display debug messages about packets received by the Layer 2 protocol queue.
Display debug messages about packets received by the logging queue.
Display debug messages about packets received by the remote console queue.
Display debug messages about packets received by the reverse path forwarding
(RFP) failure queue.
Debug packets received by the software forwarding queue.
Debug packets received by the Spanning Tree Protocol (STP) queue.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
debug platform cpu-queues
B-29
Advertisement
Table of Contents
