Cisco Catalyst Blade Switch 3130 Reference Manual page 946
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
show platform port-asic
stack {control | dest-map |
learning | messages | mvid |
prog-parser | span | stats [asic
number | port number [asic
number]]
stats {drop | enqueue |
miscellaneous | supervisor} [asic
number | port number [asic
number]]
transmit {port-fifo | queue |
supervisor-sram} [asic number |
port number [asic number]]
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
C-30
Appendix C
Cisco Catalyst Blade Switch 3130 for Dell Show Platform Commands
Display stack-related information. The keywords have these
meanings:
control—Display stack control-status register information.
•
dest-map—Display destination-map information.
•
learning—Display entries in the learning-cache.
•
•
messages—Display the stack-message register information.
•
mvid—Display entries in the mapped VLAN-ID table.
•
prog-parser—Display the programmable parser tables.
•
span—Display SPAN-related information.
stats—Display raw statistics for the port ASIC.
•
asic number—(Optional) Display information for the
•
specified ASIC. The range is 0 to 1.
port number—(Optional) Display information for the
•
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
These keywords are available only on stacking-capable switches.
Display raw statistics for the port ASIC. The keywords have these
meanings:
drop—Display drop statistics.
•
enqueue—Display enqueue statistics.
•
miscellaneous—Display miscellaneous statistics.
•
•
supervisor—Display supervisor statistics.
•
asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
•
port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
Display transmit information. The keywords have these meanings:
•
port-fifo—Display the contents of the port-FIFO information
register.
•
queue—Display the contents of the queue information
register.
•
supervisor-sram—Display supervisor SRAM information.
•
asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
•
port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.
OL-13271-01
Advertisement
Table of Contents
