Cisco Catalyst Blade Switch 3130 Reference Manual page 806

delete
delete
Use the delete boot loader command to delete one or more files from the specified file system.
Syntax Description
filesystem:
/file-url
Command Modes Boot loader
Command History Release
12.2(40)EX1
Usage Guidelines
Filenames and directory names are case sensitive.
The switch prompts you for confirmation before deleting each file.
Examples
This example shows how to delete two files:
switch: delete flash:test2.text flash:test5.text
Are you sure you want to delete "flash:test2.text" (y/n)?y
File "flash:test2.text" deleted
Are you sure you want to delete "flash:test5.text" (y/n)?y
File "flash:test2.text" deleted
You can verify that the files were deleted by entering the dir flash: boot loader command.
Related Commands Command
copy
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
A-6
delete filesystem:/file-url ...
Alias for a flash file system. Use flash: for the system board flash device.
Path (directory) and filename to delete. Separate each filename with a space.
Modification
This command was introduced.
Appendix A Cisco Catalyst Blade Switch 3130 for Dell Boot Loader Commands
Description
Copies a file from a source to a destination.
OL-13271-01