Cisco Catalyst Blade Switch 3130 Reference Manual page 354

permit (ARP access-list configuration)
Command History Release
12.2(40)EX1
Usage Guidelines
You can add permit clauses to forward ARP packets based on some matching criteria.
Examples This example shows how to define an ARP access list and to permit both ARP requests and ARP
responses from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:
Switch(config)# arp access-list static-hosts
Switch(config-arp-nacl)# permit ip host 1.1.1.1 mac host 0000.0000.abcd
Switch(config-arp-nacl)# end
You can verify your settings by entering the show arp access-list privileged EXEC command.
Related Commands Command
arp access-list
deny (ARP access-list
configuration)
ip arp inspection filter vlan
show arp access-list
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-326
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
Modification
This command was introduced.
Description
Defines an ARP access control list (ACL).
Denies an ARP packet based on matches against the DHCP bindings.
Permits ARP requests and responses from a host configured with a
static IP address.
Displays detailed information about ARP access lists.
OL-13271-01