Boot Private-Config-File - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
boot private-config-file
Use the boot private-config-file global configuration command on a standalone switch to specify the
filename that Cisco IOS uses to read and write a nonvolatile copy of the private configuration. Use the
no form of this command to return to the default setting.
Syntax Description
filename
Defaults
The default configuration file is private-config.
Command Modes
Global configuration
Command History
Release
12.2(40)EX1
Usage Guidelines
This command works properly only from a standalone switch in a stack.
Filenames are case sensitive.
Examples
This example shows how to specify the name of the private configuration file to be pconfig:
Switch(config)# boot private-config-file pconfig
Related Commands
Command
show boot
OL-13271-01
boot private-config-file filename
no boot private-config-file
The name of the private configuration file.
Modification
This command was introduced.
Description
Displays the settings of the boot environment variables.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
boot private-config-file
2-35
Advertisement
Table of Contents
