Match (Access-Map Configuration) - Cisco Catalyst Blade Switch 3130 Reference Manual

For dell command reference
Hide thumbs Also See for Catalyst Blade Switch 3130:
Table of Contents

Advertisement

match (access-map configuration)

match (access-map configuration)
Use the match access-map configuration command on the switch stack or on a standalone switch to set
the VLAN map to match packets against one or more access lists. Use the no form of this command to
remove the match parameters.
Syntax Description
ip address
mac address
name
number
Defaults
The default action is to have no match parameters applied to a VLAN map.
Command Modes
Access-map configuration
Command History
Release
12.2(40)EX1
Usage Guidelines
You enter access-map configuration mode by using the
You must enter one access list name or number; others are optional. You can match packets against one
or more access lists. Matching any of the lists counts as a match of the entry.
In access-map configuration mode, use the match command to define the match conditions for a VLAN
map applied to a VLAN. Use the action command to set the action that occurs when the packet matches
the conditions.
Packets are matched only against access lists of the same protocol type; IP packets are matched against
IP access lists, and all other packets are matched against MAC access lists.
Both IP and MAC addresses can be specified for the same map entry.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-264
match {ip address {name | number} [name | number] [name | number]...} | {mac address {name}
[name] [name]...}
no match {ip address {name | number} [name | number] [name | number]...} | {mac address
{name} [name] [name]...}
Set the access map to match packets against an IP address access list.
Set the access map to match packets against a MAC address access list.
Name of the access list to match packets against.
Number of the access list to match packets against. This option is not valid for MAC
access lists.
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
vlan access-map
global configuration command.
OL-13271-01

Advertisement

Table of Contents
loading

Table of Contents