Ip Dhcp Snooping Vlan - Cisco Catalyst Blade Switch 3130 Reference Manual
For dell command reference
Hide thumbs
Also See for Catalyst Blade Switch 3130:
- Software configuration manual (1354 pages) ,
- Hardware installation manual (84 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
ip dhcp snooping vlan
Use the ip dhcp snooping vlan global configuration command on the switch stack or on a standalone
switch to enable DHCP snooping on a VLAN. Use the no form of this command to return to the default
setting.
Syntax Description
vlan vlan-range
Defaults
DHCP snooping is disabled on all VLANs.
Command Modes
Global configuration
Command History
Release
12.2(40)EX1
Usage Guidelines
You must first globally enable DHCP snooping before enabling DHCP snooping on a VLAN.
Examples
This example shows how to enable DHCP snooping on VLAN 10:
Switch(config)# ip dhcp snooping vlan 10
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands
Command
show ip dhcp snooping
show ip dhcp snooping binding
OL-13271-01
ip dhcp snooping vlan vlan-range
no ip dhcp snooping vlan vlan-range
Specify a VLAN ID or a range of VLANs on which to enable DHCP snooping. The
range is 1 to 4094.
You can enter a single VLAN ID identified by VLAN ID number, a series of VLAN
IDs separated by commas, a range of VLAN IDs separated by hyphens, or a range
of VLAN IDs separated by entering the starting and ending VLAN IDs separated
by a space.
Modification
This command was introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
ip dhcp snooping vlan
2-175
Advertisement
Table of Contents
