Panel Button Commands; Paper Sensor Commands - Ithaca PcOS Series 80PLUS Programmer's Manual

Epson Commands
Command Descriptions
Function
ASCII
Hexadecimal
Decimal
Description

Panel Button Commands

Function
ASCII
Hexadecimal
Decimal
Range
Description

Paper Sensor Commands

Function
ASCII
Hexadecimal
Decimal
Range
Description
Function
ASCII
Hexadecimal
Decimal
Range
Page 82
PcOS Series 80PLUS
Cancel print data in page mode
CAN
18H
<24>
CAN deletes all the print data for the current print job in page mode. This
command is enabled only in page mode.
Enable/disable panel buttons
ESC c
1BH 63H
<27> <99>
0 ≤ n ≤ 255
This command enables or disables the panel buttons. When the LSB is 0,
the panel buttons are enabled. When the LSB is 1, the panel buttons are
disabled. In Epson TM-T8x emulation mode, the ESC @ command will
reenable the panel buttons.
Select paper sensor(s) to output paper end signals
ESC c
1BH 63H
<27> <99>
0 ≤ n ≤ 255
This command selects the paper sensor(s) to output paper end signals and
is only available with a parallel interface. It is ignored with a serial
interface.
Each bit of n is used as follows.
Bit Off/On Hex
0 Off 00
On 01
1 Off 00
On 02
2 Off 00
On 04
3 Off 00
On 08
4-7 - -
Select paper sensor(s) to stop printing
ESC c
1B 63H
<27> <99>
0 ≤ n ≤ 255
Rev B 4/13/99
Programmer's Guide
5 n
35H n
<53> n
3 n
33H n
<51> n
Decimal Function
0 Ignored
1 Ignored
0 Ignored
2 Ignored
0 Paper roll end sensor disabled
4 Paper roll end sensor enabled
0 Paper roll end sensor disabled
8 Paper roll end sensor enabled
- Undefined
4 n
34H n
<52> n
[E]
[EA]
[E]
[E]