Table of Contents
Advertisement
Programmer's Guide
Configuration Options
The tables below depict the options, in order, presented by the configuration mode. Each option
shows the settings available, as well as the default setting where applicable.
Hex Dump Mode
Disabled (default)
Enabled
Emulation Mode
PcOS M80PLUS
M50
Epson TM85
Epson TM88
Axiohm
Carriage Return (CR) Control
Normal return (default)
Line feed
Ignore carriage return
Language Set/Code Page
Selects the default language set/code page depending upon the selected emulation mode.
EURO Substitution
Enabled
Disabled
Auto Cutter Option
Enabled
Disabled
Input Buffer Size
45 bytes
8192 bytes (default)
16384 bytes
24576 bytes
32768 bytes
User Definable Buffer Size
14 KB
20 KB (default)
26 KB
32 KB
38 KB
Graphic Buffering
Enabled (default)
Disabled
PcOS Series 80PLUS
If hex dump is enabled, the remainder of the configuration process
will be skipped. The printer will then enter hex dump mode. The
printer will remain in hex dump until it is reset or power cycled.
Normal Ithaca M80PLUS Mode (IBM like)
Ithaca M50 Emulation
Epson TM85 Emulation
Epson TM88 Emulation
Axiohm 7193 Emulation
Perform a normal CR by returning the input pointer to the left
margin; overprint allowed.
Translate CR's into LF's
Ignore all CR's; only line feed operations result in print
Enable Euro character substitution in select code pages.
See Table A below.
RAM buffer storage for user definable character sets and images.
1 KB = 1024 bytes
The printer will print multiple lines of graphics at the same time.
Start/stop printing will be less noticeable during large images.
The printer will print graphics a line at a time.
Rev B 4/13/99
Configuration Mode
Page 11
Advertisement
Table of Contents
