M50 Compatibility Commands - Ithaca PcOS Series 80PLUS Programmer's Manual

Programmer's Guide

M50 Compatibility Commands

To allow the PcOS Series 80PLUS Printer to replace the M50 printer without effecting the M50
application, several special M50 commands are available as M50 extensions. Because these
commands can have effects that PcOS Series 80PLUS applications may not want, these commands
must be enabled.
To enable these commands, select the M50 emulation in the configuration.
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
PcOS Series 80PLUS
Extended M50 cash drawer commands
[BS]
08H
<8>
This command opens Cash Drawer 1.
Extended M50 cash drawer commands
[BEL]
07H
<7>
This command opens Cash Drawer 2.
Extended M50 cash drawer commands
[ESC]+
1BH, 2BH
<27><43>
This command opens Cash Drawer 1.
Extended M50 pass through
[ESC] d or [ESC][RS] and [ESC]"
1BH, 23H or 1BH, 64H or 1BH, 1EH and 1BH, 22H
<27><35> or <27><100> or <27><30> and <27><34>
These are Model 50 pass through commands.
[ESC] d turns on pass through, and [ESC][RS] or [ESC]" turns it off. This
command requires that the pass through function be enabled in the
configuration menu.
NOTE: [ESC]# commands available in some versions of M50 printers are not
available in this emulation.
Rev B 4/13/99
Control Codes
M50 Compatibility Commands
Page 47