Ithaca PcOS Series 80PLUS Programmer's Manual page 116

Epson Commands
Command Descriptions
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Usage
Description
Function
ASCII
Hexadecimal
Decimal
Description
Page 106
PcOS Series 80PLUS
Copy user defined storage buffers
ESC '
1BH 27H
<27> <39>
The ESC ' command copies data between the user defined RAM buffer and
the nonvolatile EEPROM buffer. This command is not recommended for
use; instead use GS - for image storage in the nonvolatile EEPROM buffer.
Select page mode
ESC L
1BH 4CH
<27> <76>
Epson TM-8x emulation
ESC L switches from standard mode to page mode. This command is
enabled only when input at the beginning of a line in standard mode; it has
no effect in page mode. Standard mode is selected as the default.
The following commands are not effective in page mode: ESC V, ESC a,
ESC {, GS L, and GS W. If these commands are processed in page mode,
an internal flag is activated.
Select standard mode
ESC S
1BH 53H
<27> <83>
ESC S switches from page mode to standard mode. This command is
effective only in page mode. Data buffered in page mode is cleared. This
command returns the values set by the ESC W command to the default
values. The value set by the ESC T command is maintained. The printer
returns to standard mode with ESC S, FF, and ESC @. This command sets
the print position to the beginning of the line.
Rev B 4/13/99
Programmer's Guide
n
n
n
[I]
[E]
[E]