Table of Contents
Advertisement
Programmer's Guide
Cash Drawer
1
2
Table 1
*This jumper is for compatibility with earlier Epson printers. Pins 3-4 are the default configuration
for these jumpers.
WARNING:
Use a drawer that matches the printer's specification. Using an improper drawer may damage the
drawer as well as the printer.
CAUTION:
Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the
telephone line may be damaged.
PcOS Series 80PLUS
J7 3-4* Pin #
Epson/Axiohm
1
Frame Ground
2
Drawer Drive - (Ground)
3
Status Switch +
4
Drawer Drive + (24V Switched)
5
Drawer Drive - (Ground)
No Connect
6
Status Switch - (Ground)
1
Frame Ground
2
No Connect
Drawer Drive - (Ground)
3
Status Switch +
4
Drawer Drive + (24V Switched)
5
Drawer Drive - (Ground)
6
Status Switch - (Ground)
Rev B 4/13/99
Setting up the Printer
Page 7
Advertisement
Table of Contents
