Ithaca PcOS Series 80PLUS Programmer's Manual page 102

Epson Commands
Command Descriptions
Function
ASCII
Hexadecimal
Decimal
Range
Description
Page 92
PcOS Series 80PLUS
Transmit status
GS r
1DH 72H
<29> <114>
1 ≤ n ≤ 2, 49 ≤ n ≤ 50
This command transmits the status specified by n as follows.
n
Function
1, 49 Transmits paper sensor status
2, 50 Transmits drawer kick-out connector status
Bit Off/On Hex
0,1 - -
2,3 Off 00
On 0C
4 Off 00
5,6 - -
7 Off 00
Paper sensor status (n = 1, 49)
Bit Off/On Hex
0 Off 00
On 01
1-3 - -
4 Off 00
5,6 - -
7 Off 00
Drawer kick-out connector status (n = 2, 50)
Rev B 4/13/99
Programmer's Guide
n
n
n
Decimal Status
- Not used; fixed to Off
0 Paper roll sensor: paper present
12 Paper roll sensor: paper not present
0 Not used; fixed to Off
- Undefined
0 Not used; fixed to Off
Decimal Status
0 Drawer 1 or 2 connector status is low.
1 Drawer 1 or 2 connector status is high.
- Undefined
0 Not used; fixed to Off
- Undefined
0 Not used; fixed to Off
[E]