Ithaca PcOS Series 80PLUS Programmer's Manual page 87

Programmer's Guide
Function
ASCII
Hexadecimal
Decimal
Range
Description
Function
ASCII
Hexadecimal
Decimal
Range
Default
Description
Function
ASCII
Hexadecimal
Decimal
Range
Description
Bit Off/On
0
1, 2
3
4
5
6
7
PcOS Series 80PLUS
Print control character
ESC ^
1BH 5EH
<27> <94>
0 ≤ n ≤ 255
This command allows characters from zero to 31 codes to be printed.
During normal operation, characters from zero to 31 are control characters.
This command turns off control code translation for character n.
Select character code table
ESC t
1BH 74H
<27> <116>
0 ≤ n ≤ 5, n = 255
n = 0
This command selects a page, n, from the character code table.
n
Character Code Table
0 Page 0 [PC437 (U.S.A. and Standard Europe)]
1 Page 1 [PC850 (Multilingual)]
2 Page 2 [PC850 (Multilingual)]
3 Page 3 [PC860 (Portuguese)]
4 Page 4 [PC863 (Canadian-French)]
5 Page 5 [PC865 (Nordic)]
255 Page 255 [Space page]
Select print mode(s)
ESC !
1BH 21H
<27> <33>
0 ≤ n ≤ 255
This command selects print mode(s) using n as follows.
Hex Decimal
Off 00
On 01
- -
Off 00
On 08
Off 00
On 10
Off 00
On 20
- -
Off 00
On 80
Rev B 4/13/99
Command Descriptions
n
n
n
n
n
n
n
n
n
Function
0 Character Font A (13 × 24)
1 Character Font B (10 × 24)
- Undefined
0 Emphasized mode not selected
8 Emphasized mode selected
0 Double-height mode not selected
16 Double-height mode selected
0 Double-width mode not selected
32 Double-width mode selected
- Undefined
0 Underline mode not selected
128 Underline mode selected
Epson Commands
[E]
[EA]
Page 77